Skip to content
Rotate at 50 logoROTATE @50
All posts

Aircraft · · Patrick Saxton

Cirrus G7 Avionics: A Beginner's Guide to the Glass Cockpit

Big screens, touchscreen controllers and a lot of information. Here's how to approach the Cirrus Perspective Touch+ flight deck without letting it fly you.

The first time you sit in a Cirrus G7, the panel can feel like a lot. Two large displays, touchscreen controllers, maps, engine data and a lot of information all at once.

The good news is that it’s designed to organize information, not overwhelm you. The trick is learning what to look at, and when.

At Essential Skills Groundschool, we teach glass-cockpit fundamentals that apply across panels, and the G7 is a good example of where those panels are headed.

What’s in a G7 panel

The G7 brought the Cirrus Perspective Touch+ flight deck by Garmin to the SR series. Instead of relying mostly on knobs and buttons, it uses large high-resolution displays and touchscreen controllers. Pilots can access flight planning, maps, procedures, audio, systems, checklists and more.

There are still physical knobs for certain functions and data entry. That matters in turbulence.

PFD and MFD

The two big screens have different jobs.

The Primary Flight Display (PFD) is right in front of you. Airspeed, altitude, attitude, heading, vertical speed and navigation information. This is your “fly the airplane” screen.

The Multi-Function Display (MFD) is the bigger picture. Moving map, flight plan, traffic, weather, engine information and more.

Both screens can be split to show more than one thing at a time. That’s useful, but beginners should resist the urge to fill every corner of every screen. More information isn’t always better.

Touchscreen controllers

The touchscreen controllers work a lot like a tablet, with icon-based menus and common functions a few taps away.

But a touchscreen in an airplane isn’t like your phone on the couch. Turbulence makes precise taps harder. Your attention needs to stay mostly outside.

So learn where things are on the ground. Practice entering flight plans, finding frequencies and pulling up procedures before you need them in the air. The fewer taps you have to figure out in flight, the lower your workload.

Flight planning

You can build and edit a flight plan on the touchscreen and see it on both displays. It shows where you are, where you’re going and what’s next.

For students, this is a great tool. It’s also where you have to be careful. The plan is only as good as what you put in. Check every waypoint and altitude, and cross-check it against your chart.

The order of priorities

Here’s a simple way to think about any glass cockpit, and it applies to the G7 too:

  1. Aviate. Fly the airplane. Attitude, airspeed, altitude. The PFD.
  2. Navigate. Know where you are and where you’re going. The map and flight plan.
  3. Communicate. Radios and ATC.
  4. Manage systems. Engine, fuel, electrical and everything else.

If you’re heads-down on the MFD trying to find a menu and the airplane is drifting off altitude, you’ve got the order backwards.

Tips for learning it

  • Use a trainer at home. Garmin and Cirrus offer simulation tools. Time on the ground is cheap.
  • Learn one function at a time. Don’t try to master everything in a week.
  • Practice with the screens failed. Know what you’d do if one display went dark. Learn the reversionary modes.
  • Hand-fly with the automation off. Regularly.
  • Ask “what’s it doing now?” If you don’t know, simplify.

Technology supports good pilots

The goal is to understand the technology without losing sight of the most important thing, which is flying the airplane.

Learn the avionics deliberately and they’ll make your flying easier and safer. Let them pull your eyes inside and they’ll do the opposite.

The airplane doesn’t care how many screens it has. It still needs a pilot.

Aviate. Then Everything Else.

At Essential Skills Groundschool, our instrument ground school and simulator sessions help you build a scan and automation habits that work on any modern panel.

A glass cockpit organizes information. You still decide what to look at and when.

More on aircraft

Aircraft

What to Know Before You Learn to Fly a Cirrus

Big screens, a capable autopilot and a parachute. A Cirrus is a great airplane, but learning one well is about fundamentals, automation management and good decisions.

Adapted from Destinations Aviation

Aircraft

Cirrus or Cessna: Which Is Better for Flight Training?

A classic high-wing Cessna and a modern Cirrus will both get you a pilot certificate. The better choice depends on your goals, your budget and what you plan to fly afterward.

Adapted from Destinations Aviation